Monster XP Series Rear Left or Right CV Axle fits Honda Talon 1000X 2019 - 2021
Location on vehicle: Rear
***See compatibility chart for specific models***
It will fit the following 4x4 applications:
2019-2021 ... Honda Talon 1000X
The Monster Axles™ XP Series axle was designed to be stronger, longer lasting, and a more dependable axle than anything else. With its inner CV joint designed like an outer joint, the axle can utilize up to a 45° angle of operation. OEM axles can only operate up to 23°. The plunge mechanism is moved from the inner joint to the shaft, eliminating issues that cause joints to bind and break. This also allows enough room for twice the plunge of OEM axles.
Unlike other brands, our axle will never bind, burr, or mushroom leaving you with a CV joint you cannot remove from the shaft. You will not find an axle that is easier to service- no more beating off the joint with a sledge hammer. Should you need replacement parts, we have them in stock and available.
- Included: 1 front left or right axle
- Fits up to a 4" lift
- Stronger than OEM chromoly forged steel axle bar
- Greased with a moly based grease to provide superior joint lubrication
- Fitted with Heavy Duty boots for added wear & puncture resistance
|2020||Honda||Talon 1000X-4||SXS10S4 FOX Live Valve|
|2021||Honda||Talon 1000X-4||SXS10S4D FOX Live Valve|
What's in the box
- Item Requires Shipping
- 16.4 lbs.
- W5.0000” x H5.0000” x L32.0000”
- Free ground shipping for lower 48 states ( some exclusions may apply)
- Fits up to 4" Lift 42220-HL6-A01 42250-HL6-A01
Total Reviews (0)
Write the First Review!
You must login to post a review.