Monster Front CV Axle Pair for Polaris RZR 900 2011-2014, XP Series
Location on vehicle: Front,Left,Right
The plunge mechanism is moved from the inner joint to the shaft, eliminating issues that cause joints to bind and break. Unlike other brands, our axle will never bind, burr, or mushroom, leaving you with a CV joint you can't remove from the shaft.
This is a Heavy Duty replacement to the OEM, but it can also support lift kits up to 4 inches if you have one.
With its inner CV joint designed like an outer joint, it can achieve a 45° angle of operation (OEM axles can only operate up to around 23°). The shaft is also providing an additional 60 mm of travel (as pictured).
Built from a unique, stronger than OEM chromoly-forged steel axle shaft. Fitted with heavy duty thermoplastic type boots for greater wear & puncture resistance.
Should you need replacement parts, we have them in stock and available.
What's In The Box
|2014||Polaris||RZR 4 900||LE EPS|
|2012||Polaris||RZR 4 XP 900||--|
|2012||Polaris||RZR 4 XP 900||EPS|
|2012||Polaris||RZR 4 XP 900||LE EPS|
|2014||Polaris||RZR 900||LE EPS|
|2014||Polaris||RZR 900||XC Edition|
|2013||Polaris||RZR XP 4 900||--|
|2013||Polaris||RZR XP 4 900||LE EPS|
|2013||Polaris||RZR XP 900||EFI|
|2013||Polaris||RZR XP 900||Jagged X Edition HO|
|2013||Polaris||RZR XP 900||LE|
|2013||Polaris||RZR XP 900||LE EPS|
|2013||Polaris||RZR XP 900||Walker Evans Edition EPS|
|2012||Polaris||RZR XP 900||EFI|
|2012||Polaris||RZR XP 900||LE EFI|
|2011||Polaris||RZR XP 900||--|
|2011||Polaris||RZR XP 900||LE|
- Item Requires Shipping
- 36.0 lbs.
- W10.0000” x H5.0000” x L32.0000”
- Free ground shipping for lower 48 states ( some exclusions may apply)
- Fits both stock suspensions AND lift kits up to 4"
Total Reviews (0)
Write the First Review!
You must login to post a review.