Additional Images

Monster Rear CV Axle Pair & Wheel Bearings for Can-Am Maverick XDS 1000 15-17

Location on vehicle: Rear,Left,Right

CA-322XP/CA-322XP/WB-1516/WB-1516
This is for 2 rear Monster XP Series CV axles for a Can-Am Maverick XDS.

***See compatibility chart for specific models***

They will fit the following Turbo applications:

2015-2017 ... Maverick 1000 XDS

2015-2017 ... Maverick Max 1000 XDS

(please note these will not fit XC, XXC, XMR models)

The Monster Axles™ XP Series axle was designed to be stronger, longer lasting, and a more dependable axle than anything else. With its inner CV joint designed like an outer joint, the axle can utilize up to a 45° angle of operation. OEM axles can only operate up to 23°. The plunge mechanism is moved from the inner joint to the shaft, eliminating issues that cause joints to bind and break. This also allows enough room for twice the plunge of OEM axles.

Unlike other brands, our axle will never bind, burr, or mushroom leaving you with a CV joint you cannot remove from the shaft. You will not find an axle that is easier to service- no more beating off the joint with a sledge hammer. Should you need replacement parts, we have them in stock and available.

Product features:

  • Included: Rear Left (1), Rear Right (1)
  • Fits up to a 4" lift
  • Stronger than OEM chromoly forged steel axle bar
  • Greased with a moly based grease to provide superior joint lubrication
  • Fitted with Heavy Duty boots for added wear & puncture resistance
  • Inboard CV joint spline count: 24 (both)
  • Outboard CV joint spline count: 29 (both)
  • Compressed overall axle length: 740 (both)
Limited Supply: only 2 remaining
Shipping: Free Shipping - Ships Same Day If Ordered Before 3EST
Pricing: $333.42
Qty:
Free ground shipping for lower 48 states ( some exclusions may apply)

Warranty

1 year, one-time repair/ replace. Buyer pays shipping

Product Notes

  • Fits lift kits up to 4". 60mm of plunge (double the amount of plunge on OEM axles); 45° angle of operation
  • The plunge mechanism is moved from the inner joint to the shaft, eliminating issues that cause joints to bind and break
  • Fits: 2015-2017 Maverick 1000 XDS / Max 1000 XDS
  • *Please note these will only fit XDS / Turbo models*
  • Replaces Can-Am OE # 705502235, 705502412, 705502363, Inner splines: 24 (both), Outer splines: 29 (both)
  • What's in the box

    2 Monster XP Series Axles, 2 wheel bearing kits

    Details

    • CA-322XP/CA-322XP/WB-1516/WB-1516
    • CA-322XP/CA-322XP/WB-1516/WB-1516
    • MONSTER AXLES
    • Available
    • New

    Shipping Information

    • Item Requires Shipping
    • 42.0 lbs.
    • W5.0000” x H10.0000” x L32.0000”
    • Free ground shipping for lower 48 states ( some exclusions may apply)
    • Free Shipping - Ships Same Day If Ordered Before 3EST

    Customer Reviews

    Comment Total Reviews (0)

    Write the First Review!

    You must login to post a review.