Monster Axle Set & 3" Lift Kit for Polaris RZR XP/XP4 1000 2016-2019, XP Series

This is set of Monster XP Series axles with a High Lifter Signature Series 3" Lift Kit for a Polaris RZR.

It will fit the following models:

2016 Polaris RZR XP 1000 (if built after 10/19/2015)

2016 Polaris RZR XP4 1000 (if built after 10/19/2015)

2017-2019 Polaris RZR XP 1000

2017-2019 Polaris RZR XP4 1000

*please note this will not work with Ride Command/Dynamix models due to wiring harness length

*please note this will not fit any RZR 1000 S or 1000 S4 type models

Product features:

• Includes: Monster Axles™ XP Series axles (4) and a 3" High Lifter Signature Series lift kit
• Lift kit made with zinc plating for long life in rugged conditions
• Lift kit installation hardware and detailed step by step photo instructions included
• Compressed axle length: Fronts - 761 mm, Rears - 737 mm
• Inner spline count: Fronts - 22, Rears - 28
• Outer spline count: Fronts - 26, Rears - 26
• Replaces OEM # (fronts) 1333943, 1333123, 1333283, 1333420
• Replaces OEM # (rears) 1333439, 1333944, 1333858

MONSTER AXLES and High Lifter have teamed up to provide the best lift set available for your RZR. More clearance, more performance, and backed by a combined 40+ years of industry experience.

The Monster Axles™ XP Series axle is designed to be stronger, longer lasting, and more dependable, no matter where you ride. A high-performance axle that can fit stock length all the way up to a 4" lift kit. Bundled with this 3" lift kit, they provide a little extra support for handling bumpy trails, crawling over rocks, and keeping you and your ride a little safer out in the wild.

Game changing design — Key to its performance, the plunge mechanism is moved from the inner joint to the shaft itself, eliminating issues that cause joints to bind and break. Unlike other brands, our axle will not bind, burr, or mushroom, leaving you with a CV joint you can't remove from the shaft.

More angle, more plunge — With its inner CV joint designed like an outer joint, it can achieve a 45° angle of operation (OEM axles can only operate up to around 23°). Both joints are fitted with heavy duty boots are assembled on a revolutionary, telescoping 4340 chromoly steel shaft which provides an additional 60 mm of travel.

Serviceable in the field — Should you need to replace a broken joint or boot, the CV joint can be easily removed for service without any specials tools. No need ship the whole axle back to us. And you can always contact us to inquire about replacement parts.

Lift your ride with confidence — High Lifter has been perfecting the lift kit for over 20 years. Their kits are precision-engineered, backed by a lifetime warranty, and are the best way to give yourself more ground clearance.