Monster Front CV Axle for Polaris RZR XP 1000 & XP4 1000 2014-2017, XP Series
Location on vehicle: Front,Left,Right
The plunge mechanism is moved from the inner joint to the shaft, eliminating issues that cause joints to bind and break. Unlike other brands, our axle will never bind, burr, or mushroom, leaving you with a CV joint you can't remove from the shaft.
This is a Heavy Duty replacement to the OEM, but it can also support lift kits up to 4 inches if you have one.
With its inner CV joint designed like an outer joint, it can achieve a 45° angle of operation (OEM axles can only operate up to around 23°). The shaft is also providing an additional 60 mm of travel (as pictured).
Built from a unique, stronger than OEM chromoly-forged steel axle shaft. Fitted with heavy duty thermoplastic type boots for greater wear & puncture resistance.
Should you need replacement parts, we have them in stock and available.
What's In The Box
|2017||Polaris||RZR XP 4 1000||EPS|
|2016||Polaris||RZR XP 4 1000||EPS|
|2016||Polaris||RZR XP 4 1000||High Lifter Edition EPS|
|2015||Polaris||RZR XP 4 1000||EPS|
|2014||Polaris||RZR XP 4 1000||EPS|
|2017||Polaris||RZR XP 1000||EPS|
|2017||Polaris||RZR XP 1000||Gold Matte Metallic LE EPS|
|2017||Polaris||RZR XP 1000||Veliocity Blue LE EPS|
|2016||Polaris||RZR XP 1000||EPS|
|2016||Polaris||RZR XP 1000||High Lifter Edition EPS|
|2015||Polaris||RZR XP 1000||Desert Edition EPS|
|2015||Polaris||RZR XP 1000||EPS|
|2015||Polaris||RZR XP 1000||FOX Edition EPS|
|2015||Polaris||RZR XP 1000||High Lifter Edition EPS|
|2014||Polaris||RZR XP 1000||EPS|
- Item Requires Shipping
- 15.0 lbs.
- W5.0000” x H5.0000” x L32.0000”
- Free ground shipping for lower 48 states ( some exclusions may apply)
- Fits both stock suspensions AND lift kits up to 4"
Total Reviews (0)
Write the First Review!
You must login to post a review.