Additional Images

Monster XP Axle replacement for Can-Am 705401235

Location on vehicle: Front,Left

CA-117XP
This is a new front, left Monster XP Series CV axle for a Can-Am Maverick 1000 UTV.

***See compatibility chart for specific models***

< font size="4" face="arial"> It will fit the following 4x4 applications:

2013-2018 ... Maverick 1000R & 1000 Turbo

2014-2018 ... Maverick Max 1000 & 1000 Turbo

(please note this will not fit XC, XXC, XMR models)

The Monster Axles™ XP Series axle was designed to be stronger, longer lasting, and a more dependable axle than anything else. With its inner CV joint designed like an outer joint, the axle can utilize up to a 45° angle of operation. OEM axles can only operate up to 23°. The plunge mechanism is moved from the inner joint to the shaft, eliminating issues that cause joints to bind and break. This also allows enough room for twice the plunge of OEM axles.

Unlike other brands, our axle will never bind, burr, or mushroom leaving you with a CV joint you cannot remove from the shaft. You will not find an axle that is easier to service- no more beating off the joint with a sledge hammer. Should you need replacement parts, we have them in stock and available.

Product features:

  • Included: 1 Front Left / Driver's Side axle
  • Fits up to a 4" lift
  • Stronger than OEM chromoly forged steel axle bar
  • Greased with a moly based grease to provide superior joint lubrication
  • Fitted with Heavy Duty boots for added wear & puncture resistance
  • Inboard CV joint spline count: 21
  • Outboard CV joint spline count: 26
  • Compressed overall axle length: 725.5
Limited Supply: only 1 remaining
Shipping: Fits up to a 4" lift! Replaces: 705401235 705401873
Pricing: $135.95
Qty:
Free ground shipping for lower 48 states ( some exclusions may apply)

Warranty

1 year, one-time repair/ replace. Buyer pays shipping

Product Notes

  • With its inner CV joint designed like an outer joint, this axle can utilize up to a 45° angle of operation -which can safely support lift kits up to 4". It ships ready to install and is intended as a heavy duty upgrade to your stock axle
  • The plunge mechanism is moved from the inner joint to the shaft, eliminating issues that cause joints to bind and break. Our axle will never bind, burr, or mushroom leaving you with a CV joint you cannot remove from the shaft
  • Fits 2013-2018 Can-Am Maverick 1000R / Max 1000R -including STD, EFI, XRS, XRS-DPS, & Turbo. (please note this will not fit XC, XXC, XMR models)
  • Replaces Can-Am OE # 705401235, Inner splines: 21, Outer splines: 26. Cotter pin and castle nut included!
  • Comes with a 1 year, 1 time, repair/ replace factory defect warranty. Replacement parts are also available. (contact seller for details)
  • Application List

    YearMakeModelSubmodelNotes
    2013Can-AmMaverick 1000R4X4{}
    2014Can-AmMaverick 1000R4x4 XRS DPS{}
    2015Can-AmMaverick 1000R4X4{}
    2013Can-AmMaverick 10004x4 XRS{}
    2015Can-AmMaverick 1000R4x4 XDS{}
    2015Can-AmMaverick 1000R4x4 XRS DPS{}
    2014Can-AmMaverick 1000R4X4{}
    2014Can-AmMaverick 1000R4x4 XRS{}

    What's in the box

    1 Monster XP Series Axle

    Product Videos

    Details

    • CA-117XP
    • CA-117XP
    • MONSTER AXLES
    • Available
    • New

    Shipping Information

    • Item Requires Shipping
    • 13.9 lbs.
    • W5.0000” x H5.0000” x L32.0000”
    • Free ground shipping for lower 48 states ( some exclusions may apply)
    • Fits up to a 4" lift! Replaces: 705401235 705401873

    Customer Reviews

    Comment Total Reviews (0)

    Write the First Review!

    You must login to post a review.