Additional Images

Monster Axles 3" Lift Set & Spacers for Polaris RZR XP/XP4 1000 16-19, XP Series

Location on vehicle: Front,Rear,Left,Right

MSET-503LAS
The Monster Axles™ XP Series axle is designed to be stronger, longer lasting, and more dependable, no matter where you ride.

Works on stock setups, helps support larger tires, and accommodates lift kits up to 4" - Lifting or adjusting a vehicles setup changes the operating angles of the CV axles. Standard axles can be stretched beyond their limits, leading to premature wear and failure. The XP Series axle increases both angle and travel, solving key issues for most riders. Stock machines can also gain a true upgrade to the OEM.

Enhanced suspension travel and articulation - The dual articulating CV joints allow for a much greater range of motion throughout the suspension cycle. And the unique 60mm internal extension gives even more travel without overstressing the axle. This means your vehicle can flex more effectively over uneven terrain.

Reduces stress and prevents binding - The increased articulation and internal extension work together to minimize the forces that are typically placed on CV joints and axle shafts during operation. This significantly reduces the risk of binding, clicking, popping, and ultimately, axle failure. This means fewer replacements, less downtime, and lower overall maintenance costs over time.

More ground contact, better traction - No matter what setup you run, the wheels gain extra articulation and make more consistent contact with the ground. This reduces wheel spin and gives the vehicle more stability and control.

Serviceable in the field - Boots rip, it happens. Should you need to replace a broken joint or boot, the CV joints are designed to be easily removed for service without specialized tools. And you can always contact us to inquire about replacement parts.

Limited Supply: only 2 remaining
Shipping: Game Changing Axles with a High Lifter Signature Series Lift & Wheel Spacers
Pricing: $1,199.99
Qty:
Free Ground Shipping

Application List

YearMakeModelSubmodelNotes
2019PolarisRZR XP 4 1000DYNAMIX Edition EPS
2019PolarisRZR XP 4 1000EPS
2019PolarisRZR XP 4 1000High Lifter Edition EPS
2019PolarisRZR XP 4 1000Ride Command Edition EPS
2018PolarisRZR XP 4 1000EPS
2018PolarisRZR XP 4 1000High Lifter Edition EPS
2018PolarisRZR XP 4 1000Ride Command Edition EPS
2017PolarisRZR XP 4 1000EPS
2017PolarisRZR XP 4 1000High Lifter Edition EPS
2019PolarisRZR XP 1000DYNAMIX Edition EPS
2019PolarisRZR XP 1000EPS
2019PolarisRZR XP 1000High Lifter Edition EPS
2019PolarisRZR XP 1000Ride Command Edition EPS
2019PolarisRZR XP 1000Trails and Rock Edition EPS
2018PolarisRZR XP 1000EPS
2018PolarisRZR XP 1000High Lifter Edition EPS
2018PolarisRZR XP 1000Ride Command Edition EPS
2018PolarisRZR XP 1000Trails and Rock Edition EPS
2017PolarisRZR XP 1000EPS
2017PolarisRZR XP 1000Gold Matte Metallic LE EPS
2017PolarisRZR XP 1000High Lifter Edition EPS
2017PolarisRZR XP 1000Veliocity Blue LE EPS

Product Notes

  • Fits the following Polaris models: 2017-2019 RZR XP/XP4 1000 & 2016 RZR XP/XP4 1000 (if built after 10/19/2015). Set includes XP Series axles (4), 2" High Lifter wheel spacers (2), and a 3" High Lifter Signature Series Lift Kit. Please note this will not fit RZR 1000 S or 1000 S4 - type models.
  • The Monster Axles™ XP Series axle is designed to be stronger, longer lasting, and more dependable, no matter where you ride. A high-performance axle that can fit stock length up to a 4" lift. Plus, the CV joint can be easily removed for service in the field without special tools.
  • Key to its performance - the plunge mechanism is moved from the inner joint to the shaft (a telescoping shaft providing 60 mm of travel). This eliminates issues that cause most joints to bind and break. And with its inner joint designed like an outer joint, you get a 45 degree angle of operation.
  • Lift your ride with confidence - High Lifter lift kits are precision-engineered and backed by a lifetime warranty. Wheel spacers are machined from aircraft grade 6061 billet aluminum and use grade 8 studs. Wheel Spacers bolt pattern: 4/156, 12 mm x 1.5.
  • Replaces axle OEM # (fronts) 1333943, 1333123, 1333283, (rears) 1333439, 1333944, 1333858. Compressed length: Fronts - 761 mm, Rears - 737 mm. Inner splines: Fronts - 22, Rears - 28. Outer splines: Fronts - 26, Rears - 26. Lift & Spacers include High Lifter Warranty. Axles include Monster Axles Warranty.

  • What's In The Box

  • 1 lift kit, 4 axles, 4 wheel spacers
  • Product Videos

    Warranty

    Monster Warranty / High Lifter Warranty

    Details

    • MSET-503LAS
    • MSET-503LAS
    • CUSTOM
    • Monster Axles
    • Available
    • New

    Categories

    Shipping Information

    • Item Requires Shipping
    • 109.0 lbs.
    • W11.0000” x H33.0000” x L21.0000”
    • Free Ground Shipping
    • Game Changing Axles with a High Lifter Signature Series Lift & Wheel Spacers

    Customer Reviews

    Comment Total Reviews (0)

    Write the First Review!

    You must login to post a review.