Additional Images

Monster Axles Set with 2" Lift Kit for Yamaha Grizzly 700 2016-2022, XP Series

Location on vehicle: Front,Rear,Left,Right

MSET-203LA
The Monster Axles™ XP Series axle is designed to be stronger, longer lasting, and more dependable, no matter where you ride.

Works on stock setups, helps support larger tires, and accommodates lift kits up to 4" - Lifting or adjusting a vehicles setup changes the operating angles of the CV axles. Standard axles can be stretched beyond their limits, leading to premature wear and failure. The XP Series axle increases both angle and travel, solving key issues for most riders. Stock machines can also gain a true upgrade to the OEM.

Enhanced suspension travel and articulation - The dual articulating CV joints allow for a much greater range of motion throughout the suspension cycle. And the unique 60mm internal extension gives even more travel without overstressing the axle. This means your vehicle can flex more effectively over uneven terrain.

Reduces stress and prevents binding - The increased articulation and internal extension work together to minimize the forces that are typically placed on CV joints and axle shafts during operation. This significantly reduces the risk of binding, clicking, popping, and ultimately, axle failure. This means fewer replacements, less downtime, and lower overall maintenance costs over time.

More ground contact, better traction - No matter what setup you run, the wheels gain extra articulation and make more consistent contact with the ground. This reduces wheel spin and gives the vehicle more stability and control.

Serviceable in the field - Boots rip, it happens. Should you need to replace a broken joint or boot, the CV joints are designed to be easily removed for service without specialized tools. And you can always contact us to inquire about replacement parts.

Limited Supply: only 2 remaining
Shipping: Game Changing Axles with a High Lifter Signature Series Lift
Pricing: $769.99
Qty:
Free Ground Shipping

Application List

YearMakeModelSubmodelNotes
2022YamahaGrizzly 700YFM700 EPS XT-R
2022YamahaGrizzly 700YFM700P 4x4 FI EPS
2022YamahaGrizzly 700YFM700PSE 4x4 Special Edition FI EPS
2021YamahaGrizzly 700YFM700 EPS XT-R
2021YamahaGrizzly 700YFM700P 4x4 FI EPS
2021YamahaGrizzly 700YFM700PSE 4x4 Special Edition FI EPS
2020YamahaGrizzly 700YFM700 EPS XT-R
2020YamahaGrizzly 700YFM700P 4x4 FI EPS
2020YamahaGrizzly 700YFM700PSE 4x4 Special Edition FI EPS
2019YamahaGrizzly 700YFM700P 4x4 FI EPS
2019YamahaGrizzly 700YFM700PSE 4x4 Special Edition FI EPS
2018YamahaGrizzly 700YFM700P 4x4 FI EPS
2018YamahaGrizzly 700YFM700PLE 4x4 Limited Edition FI EPS
2018YamahaGrizzly 700YFM700PSE 4x4 Special Edition FI EPS
2017YamahaGrizzly 700YFM700P 4x4 FI EPS
2017YamahaGrizzly 700YFM700PLE 4x4 Limited Edition FI EPS
2017YamahaGrizzly 700YFM700PSE 4x4 Special Edition FI EPS
2016YamahaGrizzly 700YFM700D 4x4 FI
2016YamahaGrizzly 700YFM700P 4x4 FI EPS
2016YamahaGrizzly 700YFM700PLE 4x4 Limited Edition FI EPS
2016YamahaGrizzly 700YFM700PSE 4x4 Special Edition FI EPS

Product Notes

  • Fits the following Yamaha ATVs: 2016-2022 Grizzly 700 (including EPS, FI, SE, & Hunter models). Included: Set of 4 Monster Axles™ XP Series axles & a High Lifter Signature Series 2" lift kit (with hardware and installation instructions for lift kit).
  • The Monster Axles™ XP Series axle is designed to be stronger, longer lasting, and more dependable, no matter where you ride. A high-performance axle that can fit stock length up to a 4" lift. Plus, the CV joint can be easily removed for service in the field without special tools.
  • Key to its performance - the plunge mechanism is moved from the inner joint to the shaft (a telescoping shaft providing 60 mm of travel). This eliminates issues that cause most joints to bind and break. And with its inner joint designed like an outer joint, you get a 45 degree angle of operation.
  • Lift your ride with confidence - High Lifter has been perfecting the lift kit for over 20 years. Their kits are precision-engineered, backed by a lifetime warranty, and are a guaranteed way to make a statement (and room for bigger tires).
  • Lift Kit features zinc plating for long life in rugged conditions. AXLE SPECS - Compressed Length: Fronts - 536 mm, Rears - 553 mm. Inner Splines: Fronts - 21, Rears - 23. Outer Splines: Fronts - 27, Rears - 27. Lift Kit includes a High Lifter Lifetime Warranty. Axles include Monster Axle warranty.

  • What's In The Box

  • 1 lift kit, 4 axles
  • Product Videos

    Warranty

    Monster Warranty / High Lifter Warranty

    Details

    • MSET-203LA
    • MSET-203LA
    • CUSTOM
    • MONSTER AXLES
    • Available
    • New

    Categories

    Shipping Information

    • Item Requires Shipping
    • 54.0 lbs.
    • W14.0000” x H14.0000” x L25.0000”
    • Free Ground Shipping
    • Game Changing Axles with a High Lifter Signature Series Lift

    Customer Reviews

    Comment Total Reviews (0)

    Write the First Review!

    You must login to post a review.